Viper™ Pro-10™ and Pro-4™ Motor Magnets for BSRT G3-R and Tomy Super G Plus
$9.95 for 1 pair either grade
These are the real deal Level 10 & Level 4 grade compression molded motor magnets.
Specifically made to fit BSRT G3-R and Tomy Super G Plus cars. HOPRA Approved.
Available in the shopping cart and on eBay.
Viper™ Black Diamond™ Pro-10™ Traction Magnets for Tomy Super G Plus
$11.95 for 2 pairs
These are the real deal Level 10 grade compression molded full-width magnets. Specifically made to fit Tomy Super G Plus cars. It is recommend that you run firm slip-on tires such as Super Tires in compound “B” on a quality after market narrow rear hub. 15% more applied rail force than stock factory SGP traction magnets.
These will also fit a BSRT Scale Auto G3 and G3-R chassis with a top shim. Magnets have the “G” notch. 7% more applied rail force than full-height G car ceramic traction magnets.Buy Now
Viper™ Pro-35™ Neo Traction Magnets for BSRT G3-R and Tomy Super G Plus
$14.95 for 2 pairs
These are the real deal – Level 35. Specifically made to fit BSRT Scale Auto G3-R chassis and Tomy Super G Plus cars. These are sold as a serious hop-up part – you better have the right tires and tools to keep from frying your armature. It is recommend that you run firm slip-on tires such as Super Tires in compound “B”.
You can NOT run these in a BSRT flexible chassis with a flexible magnet clip. Only medium and stiff chassis should be used. You need a top shim for installatoin into BSRT chassis. The Tomy SG+ traction magnet clip must be in good shape and hold the magnets tight.
Magnets will work in a Wizzard Storm chassis with a top spacer.
The Mega-Gs have always needed more ‘magnets’ – so here they are. With the right size tires they give your Mega-G 40% more applied downforce. These will make your Mega-G actually fun to run.
The bottom of the rear motor magnet clip in the long wheel-base chassis will have to be shaved off about .025″ for best fit.
The new shorter 1.5″ wheel-base chassis has to have the ‘keeper tap’ on the inside of the magnet box just above the existing magnets shaved off. The replacement magnets are then glued into place – see the three above photos.
Viper™ Pro-10™ Magnets for Tyco 440×2 Chassis – $3.99 pair
The magnets are North / South oriented so they can be installed in either high downforce or low downforce (motor mode). Magnets are marked red for the right side and white for the left side.